Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manuale Utente Scaricare il pdf (Pagina 34)

Opening the ApplicationTemplate

Simulation (valid for the ApplicationTemplateCounter)

Lenze · ApplicationTemplate · 1.3 EN - 04/2013

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

7.5 Simulation (valid for the ApplicationTemplateCounter)

 How to deactivate the "Watchdog" monitoring:

1. Double-click the A90_Resources folder in the device view.

• Double-click Task configuration TaskHighPriority .

•On the Configuration tab, deactivate the Watchdog option by removing the ;

checkmark:

•Double-click Task configuration TaskMidPriority .

•On the Configuration tab, deactivate the Watchdog option by removing the ;

checkmark:

 Note!

In order to be able to use the simulation mode in the "ApplicationTemplateCounter", the

"Watchdog" monitoring must be deactivated (corresponds to the standard setting in the

ApplicationTemplate).

An activated "Watchdog" monitoring results in an error message so that the simulation

mode cannot be activated.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 176 177

Nessun commento

Lenze PLC Designer ApplicationTemplate (PLC Designer R3- Manuale Utente Pagina 34