Lenze DDS Target 9300 Servo PLC V8.x Manuale Utente Scaricare il pdf (Pagina 65)

9300 Servo PLC

System blocks

2.12 MCTRL_MotorControl (node number 131)

2−59

9300 Servo PLC EN 5.1

2.12.6 Maximum speed

The maximum speed (n

max

) is set under C0011. This value is used as a reference for the absolute and

relative setpoints selected for the acceleration and deceleration times and for the upper and lower

speed limits.

 n

max

= 100 %  (INT) 16384

Code LCD

Possible settings

Info

Lenze Selection

C0011 Nmax 3000 Maximum speed

Reference value for the absolute and

relative setpoint selection for the

acceleration and deceleration times.

 For parameterisation via interface:

Large changes in one step should

only be made when the controller

is inhibited.

500 {1 rpm} 16000

Tip!

MCTRL_nNmaxC11 displays the maximum speed set under C0011.

 Use this system variable for programming your own speed scalings.

 Example: C0011 = 3000 rpm  MCTRL_nNmaxC11 = 3000

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 168 169

Nessun commento

Lenze DDS Target 9300 Servo PLC V8.x Manuale Utente Pagina 65