Lenze PLC Designer R3-x Manuale Utente Scaricare il pdf (Pagina 34)

Working with the sample projects

Sample project with the "Actuator speed" application - Actuator Speed

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

7.1.6.2 Automatic mode

• Button  selects the automatic mode.

• Button  starts the motion profile.

• Button  inhibits the motion profile.

•Display field  indicates the status of the mode.

•Display field  shows the current speed (Speed Value variable).

• Dialog box indicates the machine status.

• Control field  shows the bus communication status.

• Control field Error indicates the error message status.

• Error in the application

• Error in the controller

•The Error Reset button resets the error messages.

7.1.6.3 Manual mode ("Manual jog")

The controller can be actuated manually via the visualisation of the L_LCB_ActuatorSpeed block.

 Select mode  Stop button  Actual speed Status

Start button  Status  Status

 Note!

If a bus communication error occurs, the control and drive controller are to be restarted,

since the sample application does not support an automatic reset of bus

communication.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 158 159

Nessun commento

Lenze PLC Designer R3-x Manuale Utente Pagina 34