Lenze ETC Motion Control Manuale Utente Scaricare il pdf (Pagina 320)

100

101

ETC−MMI

"Diagnostics" operating mode

7.7

320

EDSTCXN EN 2.0

Start Starts the selected program or blockwise processing in

single block operation.

Stop Immediately stops program execution. All axes are

stopped with the set deceleration ramps. After a restart,

processing is started again.

Travel+ Manual traverse key for positive axis direction of the

selected axis.

Travel− Manual traverse key for negative axis direction of the

selected axis.

Axis Select the axis to be traversed. Alternatively, the axis

can be selected by means of the <Cursor> keys.

Override+ Increase the axis or path speed of the selected axis (in

percent of MK_VMAX). Over 10%, the value is changed

in steps of 10%, below 10% in steps of 1%.

Override− Reduce the axis or path speed of the selected axis (in

percent of MK_VMAX). Over 10%, the value is changed

in steps of 10%, below 10% in steps of 1%.

Vertical function keys

1 2 ... 315 316 317 318 319 320 321 322 323 324 325 ... 427 428

Commenti su questo manuale

ama 11 Jan 2025 | 19:35:39

rasha

Lenze ETC Motion Control Manuale Utente Pagina 320

Commenti su questo manuale

Prodotti e manuali riguardandi Software Lenze ETC Motion Control